A heavy-duty stainless steel digital caliper with a 0–300 mm (12") range and 0.01 mm (0.0005") resolution. It measures outside and inside diameters and depth, and offers optional data output through a cable.
A mechanical outside micrometer from Mitutoyo with a 0–25 mm range and 0.01 mm graduation. It has a ratchet stop for consistent measuring force and ±2 µm accuracy. It is used for workshop, laboratory and quality-control measurement of outside diameters and thicknesses.
A Mitutoyo digital micrometer with a 0–1" (0–25.4 mm) range, switchable between inch and metric units on an LCD. It has a 0.001 mm (0.00005") resolution, ±0.0001" accuracy, carbide-tipped measuring faces and a friction thimble for consistent measuring force. It comes in a plastic case.
An automatic pull-off adhesion gauge that uses a hydraulic pump to apply pressure smoothly and continuously, up to 100 MPa (14,400 psi). It has adjustable pull rates, ±1% full-scale accuracy and USB/Bluetooth data output. It stores up to 60,000 readings and works with 10, 14.2, 20 and 50 mm dollies
A coating thickness gauge with an integral ferrous probe that measures dry film thickness from 0 to 1500 µm. It has a 2.4" color display, USB and Bluetooth data output, and an IP64-equivalent impact, water and dust resistant housing. It stores readings and calibrations in its memory.
A handheld sound level meter that measures noise from 32 to 130 dB with ±1.0 dB accuracy. It has a large LCD, a built-in microphone, a frequency range of 31.5 Hz to 8 kHz and a wind screen. It is used for noise checks in industry, building services, workplaces and event venues.
A sound level meter for measuring environmental and workplace noise from 30 to 130 dB. It offers A and C frequency weighting, FAST/SLOW response, MAX/MIN capture, data hold and an analog bar graph. It stores 63 readings and has a backlit display.
A digital light meter with a split probe, so the sensor can be placed away from the display. It measures illuminance up to 199,900 Lux with auto ranging and selectable Lux/Fc units. It has MAX/MIN, data hold, a backlight and auto power-off, for lighting surveys and workplace illumination checks.
A stainless steel safety-version Bourdon tube pressure gauge for the process industry. It has a solid baffle wall and a blowout back for operator protection, and meets EN 837-1 and ASME B40.100. It is available in 63, 100 and 160 mm sizes, with scale ranges up to 1,600 bar (20,000 psi).
A Fluke digital multimeter with a 4000-count LCD, rated for 1000 V between terminal and earth ground. It runs on two AA batteries for at least 500 hours. It is used for commissioning, maintenance and troubleshooting on electrical and HVAC systems.
